Description
-
Conforms to ASTM E 139
-
Stable & Reliable performance
-
PC based data acquisition system
IMPRESSION CREEP TEST RIG TE-100-ICT
In Stock
Application
The Impression Creep Test Rig is designed to provide solution for maintaining constant loads for long term creep & stress rupture testing applications of metallic materials in accordance with ASTM E 139. These tests can run from only a few hours up to and exceeding 10000 hours. The long duration of these tests makes the lever arm loading system with dead weights.
Technical Specifications
Capacity -100 kg
Loading arrangement-manual by dead weight in steps of 0.10kg,
0.25kg, 0.50kg & 1 kg
Indenter material-Tungsten carbide
Indenter dimensions-1.0, 1.5 & 2.0mm diameter
Specimen dimension-15mm x 20mm square (approx)
LVDT -0-5mm range with resolution of 1 micron
Heating arrangement-Cylindrical furnace
Temperature range-6000C
Vacuum level-Vacuum of 2E-6bar or better
Temperature accuracy-±10C
Deflection sensor-LVDT
Data output-Tabular and graphical for depth of indentation
versus time, creep strain versus time, creep
strain rate versus time, creep strain rate versus
strain.
Related products
-
HIGH TEMPERATURE HIGH FREQUENCY FRICTION & WEAR TEST RIG TE-300-HTR
Conforms to ASTM G 133-05 Repeatable friction & wear measurement Independent proven repeatability Easy to calibrate Compact standalone bench top system
-
JOURNAL BEARING TEST RIG TE-260-JBT
Application
The journal bearing test rig for investigating the distribution of pressure in slide bearings the principal of hydrodynamic lubrication. The distribution of pressure & the carrying capacity can be determined on a sliding bearing model at different bearing loads & speeds.
Learning objectives/experiments
-
Relocation of the shaft journals in relation to speed
-
Pressure distribution in the bearing with constant load and at various speeds
-
Critical speed in relation to load
-
Critical speed & viscosity in relation to oil temperature
-
-
ICE ADHESION TEST RIG TE-10K-IAT
Application
Ice Adhesion Test Rig is used to measure the Adhesion of Ice on different surfaces. The test surface is in the form of a cylinder and ice is formed in an annular space between the test surface and a standard surface.
-
DRY SAND ABRASION TEST RIG / THREE BODY ABRASION TEST RIG TE-228-DAT
Application
To Test the abrasive resistance of solid materials to abrasive dry sand compositions. Materials such as metals, minerals, polymers, composites, ceramics, abrasives and thick coatings can be tested with this instrument.
To develop a comparison table for ranking different materials with respect to each other, it is necessary to convert this mass loss to volume loss to account for the difference in material density.
Reviews
There are no reviews yet.