Description
-
Conforms to ASTM G 76 standard
-
Instrumentation version
-
Measurement of particle velocity
-
Sample heating system
-
Digital pressure regulator
- Variable particle feed
AIR JET EROSION TEST RIG TE-400-STD
In Stock
Application
-
The air jet erosion tester is used to test the erosion resistance of solid materials to a stream of gas containing abrasive particles.
-
Materials such as metals, ceramics, minerals, polymers, composites, abrasive and coatings can be tested with this instrument.
- The test specimen, temperature, angle of incidence of the jet stream, abrasive particulate speed and flux density, can be varied to best simulate actual conditions.
Technical Specifications
Fluid Air
Temperature-ambient
Pressure -6 bar max.
Velocity -up to 300m/s max
Nozzle -Tungsten carbide
Particle
Temperature -ambient
Velocity-up to 100m/s max.
Feed rate-0.5 to 10 gm/min continuously variable
Specimen size-25mmx25mm max. Thickness 3-5mm max.
Specimen Heating Temperature 4000C
Nozzle Size-1.5mm
Adjustment in X,Y,Z and tilt of specimen from 0-900 (continuously variable)
Double disc arrangement for particle velocity measurement.
Related products
-
RECIPROCATING FRICTION & WEAR TEST RIG TE-200-SRF
The Reciprocating Friction & Wear Test Rig is versatile digitally controlled equipment to test various metals, coatings under reciprocating sliding contact at various load & sliding frequencies under dry & lubricated (with oil & grease) condition.
-
HIGH TEMPERATURE PIN ON DISC FRICTION & WEAR TEST RIG TE-80-HTP
Application
The High Temperature Pin On Disc Friction & Wear Test Rig is primarily intended for determining the tribological characteristics of wide range of materials under high temperature & vacuum condition to evaluate the wear and friction characteristics of real life condition.
-
DRY SAND ABRASION TEST RIG / THREE BODY ABRASION TEST RIG TE-228-DAT
Application
To Test the abrasive resistance of solid materials to abrasive dry sand compositions. Materials such as metals, minerals, polymers, composites, ceramics, abrasives and thick coatings can be tested with this instrument.
To develop a comparison table for ranking different materials with respect to each other, it is necessary to convert this mass loss to volume loss to account for the difference in material density. -
AIR JET EROSION TEST RIG TE-400-HMI
Application
-
The air jet erosion tester is used to test the erosion resistance of solid materials to a stream of gas containing abrasive particles.
-
Materials such as metals, ceramics, minerals, polymers, composites, abrasive and coatings can be tested with this instrument.
-
The test specimen, temperature, angle of incidence of the jet stream, abrasive particulate speed and flux density, can be varied to best simulate actual conditions.
-
Reviews
There are no reviews yet.