Description
-
Conforms to ASTM G 76 standard
-
HMI (Human Machine Interface) version
-
Measurement of particle velocity
-
Sample heating system
-
Digital pressure regulator
-
Variable particle feed
-
User friendly
AIR JET EROSION TEST RIG TE-400-HMI
In Stock
Application
-
The air jet erosion tester is used to test the erosion resistance of solid materials to a stream of gas containing abrasive particles.
-
Materials such as metals, ceramics, minerals, polymers, composites, abrasive and coatings can be tested with this instrument.
-
The test specimen, temperature, angle of incidence of the jet stream, abrasive particulate speed and flux density, can be varied to best simulate actual conditions.
Technical Specifications
Fluid Air
Temperature-ambient
Pressure -6 bar max.
Velocity -up to 300m/s max
Nozzle -Tungsten carbide
Particle
Temperature -ambient
Velocity-up to 100m/s max.
Feed rate-0.5 to 10 gm/min continuously variable
Specimen size-25mmx25mm max. Thickness 3-5mm max.
Specimen Heating Temperature 4000C
Nozzle Size-1.5mm
Adjustment in X,Y,Z and tilt of specimen from 0-900 (continuously variable)
Double disc arrangement for particle velocity measurement.
Related products
-
DRY SAND ABRASION TEST RIG / THREE BODY ABRASION TEST RIG TE-228-DAT
Application
To Test the abrasive resistance of solid materials to abrasive dry sand compositions. Materials such as metals, minerals, polymers, composites, ceramics, abrasives and thick coatings can be tested with this instrument.
To develop a comparison table for ranking different materials with respect to each other, it is necessary to convert this mass loss to volume loss to account for the difference in material density. -
PIN ON DISC FRICTION & WEAR TEST RIG – TE-165-SPOD
Application
The Pin on Disc Friction & Wear Test Rig is primarily intended for determining the tribological characteristics of wide range of materials under various conditions of normal loads & temperatures under dry & lubricated conditions with different environmental conditions.
-
HIGH TEMPERATURE PIN ON DISC FRICTION & WEAR TEST RIG TE-80-HTP
Application
The High Temperature Pin On Disc Friction & Wear Test Rig is primarily intended for determining the tribological characteristics of wide range of materials under high temperature & vacuum condition to evaluate the wear and friction characteristics of real life condition.
-
TWO BODY ABRASION TEST RIG TE-250-TAT
Application
The programmable logic controlled Multi-Pass-Two Body Abrasive Wear Test Rig is used to evaluate the tribological properties of wear & friction properties of the test sample with an applied load against the fresh abrasive surface.
Reviews
There are no reviews yet.